Protect your Edge 520 with these form-fitting, removable silicone cases.
Sigma's replacement spoke magnet fits standard spokes and works with Sigma speed sensors.
Sigma Sport's Cadence Power Magnet is the correct replacement magnet for any Sigma Sport computer featuring cadence (computers sold separately). It attaches to your crankarm with zip ties and double-sided tape (both included).
Easy installation, just squeeze the legs of the spring steel bracket, and insert into vent. Use the 3M VHB (trademark symbol) tape if desired. Comes with rubber plug with rare earth magnet. Simply insert plug into back of GoKASE and keep it all the time on the case. Easy access to tunes or GPS on…
The PanoComputer Mount works with all Topeak's phone packs and RideCase. It's compatible with 31.8mm handlebars.
- Allows rider to update firmware in G3 PowerCap. - Allows rider to change the hub’s CR2032 battery. - Used for the removal of the G3 PowerCap. - Removes the G3 PowerTap cap to update the firmware or change the hub’s CR2032 battery.
Each GPS unit comes with a Standard GPS Mount. Included are two sets of o-rings (two diameters), plus a backup o-ring in each size, a rubber shim and an X-Lock composite mounting bracket. The rubber shim supports the X-Lock mount which is engineered to attach at any 9° angle and still allow the…
Keep your computer and sensors ready for every ride with replacement batteries Key features: - CR2032 battery is used for most Trek and Bontrager computers - 23AE battery is used for the Bontrager Interchange Analog Wireless Sensor - LR44 and L1154 batteries are identical and used in Bontrager…
Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride. Key features: - Universal crank magnets work with any cadence sensor - Get the perfectly sized magnet, sized right for your bike and sensor - 20mm cadence…
Keep your computer where you can read it with Delta's stem bolt-mounted Computer Caddy. It provides a mounting point for awkward or crowded bars. - Mounts securely using the stem bolt - Adds a space to mount up to two devices - Weight limit of 125g (0.28 pounds) per side
Accessories and spare batteries for WASPcam Gideon, 9900, 9901, and JAKD cameras
- Replaces crank arm mounted cadence magnet with pedal hex mounted magnet - O-ring presses tightly into any pedal's hex wrench fitting, choose 6mm or 8mm - 3 lengths, sizing refers to the distance magnet extends from crank arm
Mounts and parts for WASPcam Gideon, 9900, 9901, and JAKD cameras
Garmin's set of Bike Cadence Sensor Replacement Bands fasten your Bike Cadence Sensor (sold separately) to any size crank arm.
The cadence magnet pedal insert is designed for tight installation situations. The principle is simple, yet space-saving: the power magnet attaches to any steel pedal spindle by magnetic force alone. From there, it triggers the cadence transmitter with each crank revolution.
Replacement handlebar/stem mount for wireless CR 2450 computers. Compatible devices: ROX 8.0 ROX 9.0 ROX 8.1 Rox 9.1 BC1909HR BC2209MHR ROX 5.0 ROX 6.0
Cadence sensor kit for Universal bracket only. * Note: mount sold separately
Replacement elastic band for Sigma STS heart-rate transmitter straps.
CR2450 battery for SIGMA computers. Fits BC 1909, BC 2209, BC 2209 Targa, and ROX models.
Power Spoke magnet for all Sigma computers. Fits round and bladed spokes.
Wireless mounting bracket for 2012, 2009 STS & 2006 DTS model computers. Handlebar or stem mount. Compatible models: BC 1106 DTS BC 1606L DTS BC1706HR DTS BC 2006 MHR DTS BC 1009 STS BC 1609 STS BC 8.12 ATS BC 12.12 STS BC 14.12 STS BC 16.12 STS Baseline 1200 plus
Use Garmin's elastic bands with your quarter-turn bike mount to attach your compatible Edge to your bicycle's stem or handlebars.
CR2032 Lithium 3V battery for SIGMA computers, heart rate monitors, transmitters, and Micro Lights. Functions/Features Fits all 2003 and up twist lock computers, PC3, PC4, PC9, PC15, Shape watch, FIT watch, Onyx series HRM's, all HRM transmitters, and Micro Lights.