Vision's Presta Valve Extender simply screws onto your tire's built-in valve to make it long enough to protrude through your deep-section aero wheels (choose the right length to fit your rim depth). This ensures that you can keep your tires properly inflated. This lightweight and durable aluminum…
The Problem Solvers Axle Nut is perfect for wheels with solid axles (also called bolt-on axles). This quality nut is made of durable chrome-plated steel and features a built-in integrated rotating washer to hold tight.
WTB's rim strips protect your tubes from rubbing against your rim. They are simple to install and they help reduce the chance of flats caused by friction between the tube and rim.
SRAM's Rise MTB Wheel Rim Strip is a great replacement for your Rise 40 or Rise 60 wheels. These lightweight rim strips are 21-mm wide.
SRAM's Rise 40 Conversion Cap Tool will allow you to easily change the conversion caps (sold separately) on your Rise 40 wheels.
Lay down Stan's Universal Kit Rim Tape before the tubeless conversion of your non-Stan's rims. It makes your rims air tight and ready for tubeless use by covering the spoke holes.
Package comes with two pieces of rim tape for use with the Zipp clinchers. Woven nylon material. Tape is extra thin with a thickness of 0.5 mm. Note: For Zipp 700c and 650c aluminum/carbon hybrid clichers, use the 16 mm rim tape. For Zipp 30 wheel set use 18mm but for the wider Firecrest and…
• Easily snaps over your rims • Stretchy, tightly woven material provides a close fit and protects from abrasion • Sold as a pair • Available for 26-inch, 27.5-inch, 29-inch, and 700c wheels • Not for tubeless set up
- Press fit designed to work the hub's non-drive side collar.
Replacement Sleeve for Odyssey's Graduate PC Peg. Sold individually.
When you can’t even see a part, you might forget about it, but it doesn’t mean its not important. Flat tires are probably the most common bicycle failures. Many times, flats are caused by the rims, specifically the lack of protection from the rims' sharp edges. Good rim strips didn’t exist for BMX…
Whisky Parts Co. Tubeless Rim Tape.
• Rim valve grommet for XXX rims • Rubber
- To be used exclusively with Bontrager 29""/700c Tubeless Ready (TLR) wheels - TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion - Width : 21mm
Key features: - Replacement, high-quality rim strips that help prevent flat tires - Compatible with nearly all common wheels - To best know which model works best for you, measure the internal dimension of your rim - For rims with internal dimensions up to 15mm (ETRO 622x15mm), use the narrow rim…
Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride. Key features: - Universal wheel magnets work with any speed sensor - Thread-on speed magnet is positioned closer to the sensor for improved signal - Aero speed…
Origin-8's Pro Pulsion Rim Strips are made from a super-durable, environmentally friendly PVC material.
• Urethane coated nylon • High performance rim strips • 1 pair per box
Origin-8's Torq Lite Track Cog Lock Ring 1.29" x 24 tpi with left-handed threaded thread is the only lock ring you need. Hardened threading and extra material make this highly durable to help you go the distance.
• Replacement steel quick release skewers
These rim strips are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance. Key features: - To be used exclusively with Bontrager 29"/700c Tubeless Ready (TLR) wheels - TLR Rim Strips are the light and easy solution to Bontrager Tubeless…
These rim valves are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance. Key features: - To be used exclusively with Bontrager Tubeless Ready (TLR) wheels - Required for Bontrager's Tubeless Ready (TLR) system setup - Removable valve…
- Replacement rear skewer - Spacing: 135mm - Material: Steel
• Rim strips for 26-inch fat bike rims
- Syntace x-12 Rear axle standard creates a stiffer and lightweight rear end - Syntace x-12 Parts are only compatible with frames that have Syntace x-12 Dropouts
- High performance adhesive tape, a great pairing with Velox Cement - Each roll is usually adequate for gluing two tubular tires - Protects tube from spoke/nipple/rim puncture
- Mini kits include 2 front spokes and 2/3 rear spokes with corresponding self-locking nuts and nut supporting plates - Single spoke kits include 1 spoke and 1 nipple - Special spokes/nipples are used to obtain Fulcrum's Dynamic Balance and include 1 spoke0803297981058
- CULT ceramic renewing kits can be used to upgrade Fulcrum wheels that come stock with stainless steel bearings - UM-73015/73017: hub renewing kit includes (2) each of dust seals, hub cones, hub cups, and steel ball bearings
- Anodized aluminum or plated brass. - 50 per bag - 16mm length
- Anodized aluminum or plated brass. - 50 per bag