Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Wheels

$106.00
Wheel Freehub Kit—XD Driver Body Kit—Zipp ZM2 - Compatible With: WH-MOTO-30-B1
$2,550.00
What It Is The definitive mountain wheel. The M6 Series defines the modern and varied interpretation of the mountain bike. Loaded with traction and acceleration on the climb, it's also backed with precision and control while absorbing vibrations and impacts on the descent. The M6 Series is designed in two diameters and three widths to ensure your sophisticated preference for tire size and pressure is met with an uncompromising tire-to-rim interface. Who It's For The mountain biker who wonders what is possible, the skeptic afraid of "plastic" wheels, the weight weenie, the Clydesdale, the high-mileage guy, the weekend warrior. It would be easier to describe who it is not for… Why We Made It ENVE showed the world that a mountain bike wheel could be carbon — we're still immensely proud of that achievement. A mountain bike wheel, however, can be so much more. The M6 Series is not about technical challenges, and we refuse to chase specifications in order to be the widest, tallest, or stiffest. For the M6 Series of wheels, the question was not about carbon, rather, "What is the potential of a mountain bike wheel?" Each M6 Series wheel model is designed for the broad range of tire widths, hub configurations, and sizes so that you, the modern trail rider, can choose between them.
$64.00
Shimano Dura-Ace 9000 Hub Quick Release Skewer. - Axle Type: Standard QR
$45.99
With simple setup and reliable trail performance, the SLX front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with Center Lock spline mount and lock ring - Tool-free 15mm thru axle system is stiff and lightweight - Simple setup and reliable trail performance
$588.00
Chris King Boost 6-Bolt 148x12 rear hubs are designed as precision mountain tools. We use one-piece solid axles to provide a stiff hub that will help your suspension perform better and drive every watt of power into the dirt. To thwart mud, water, and contaminants as you power through rough trails, Boost 6-Bolt hubs have heavy-duty bearing seals, and a threaded driveshell seal ring. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use. The patented Chris King RingDrive with 72-points of simultaneous-engagement will get your power to the ground fast, provide unmatched engagement, and give you that legendary Chris King angry-bee sound. - Steel Bearings - Engineered, manufactured and assembled in Portland, Oregon USA - King Lifetime Warranty - Canted flanges for stronger wheel builds - Patented RingDrive system with 72 simultaneously interfaced points of contact for unmatched hub engagement - Legendary made-in-house bearings - Come in 28h and 32h drilling - Available with Micro Spline, HG or XD driveshell. - Easily serviceable with a 2.5mm hex and pick or pen knife - Completely re-buildable with our ISO Hub Service Tool - Responsibly lightweight - Ceramic bearing upgrade available - Specifically designed for "BOOST" 148mm x 12mm axle standard
$19.99
- Straight gauge spokes with a proprietary grade of stainless steel that is as good or better than the materials used by the world’s most renowned spoke makers. - Sized and dimensioned specifically for BMX.
$11.99
- Variable widths - Left: 35mm - Center: 52mm - Right: 39mm - Length: 126mm - Overall: 147mm
$6.99
- Flanged 15mm axle nuts - Durable chromoly construction - Spacing / Axle: B/O
$949.99
Disc brakes have arrived in road cycling. They’re proven in mountain and cyclocross, and with the new EC90 SL Disc wheels combined with the latest brake systems, there are no longer any compromises associated with going disc. The EC90 SL takes the proven Fantom rim shape and scales it down to a shallower 38-millimeter depth. The EC90 SL Disc is available in tubular or certified Road Tubeless carbon clincher and are entirely built by hand from start to finish and acoustically tuned. These wheels combine top-end materials, a methodical build and the proven M1 6-bolt disc hubset. Best of all, these wheels are future proof, they can convert to 15x100 & 12x100; parts sold separately.
$7.99
Replacement freehub spoke protector, in various sizes for different freehub sizes. - Made of clear plastic - 3 hooks for affixing to spokes
$24.95
WTB's TCS AL valves are aluminum to shed grams, and come in catchy anodized red, black, or blue. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch. - Presta - 34mm
$5.99
- Fits all freewheel hubs - Will not fit Cassette hubs - Type: STD Plastic - Color: Clear
$6.99
- Flanged 15mm axle nuts - Durable chromoly construction - Spacing / Axle: B/O
$69.00
The best price on the market for a wheel meant to be ridden. Single-wall rims and loose-ball hubs that come out of the box round and true.
$2.00
Heavy duty and extra wide PVC rim strips for maximum tube protection.
$15.99
Origin-8's Torq Lite Track Cog Lock Ring 1.29" x 24 tpi with left-handed threaded thread is the only lock ring you need. Hardened threading and extra material make this highly durable to help you go the distance.
$17.99 - $27.99
- AL6061 alloy tubeless Presta valve - Includes 2 O-rings, one standard profile and one aero profile, for an airtight seal on any rim - Removable valve core for installing sealant - Additional replacement valve cores sold separately - Sold individually
$10.00
Using Easton End Caps allows you to utilize the versatility of Easton Wheels. Easton wheels are interchangeable with a variety of wheel mounting standards.
$34.99
Get your WeThePeople Arrow Front Hub Axle/Cone Set and freshen up that front end that's a little wobbly after that last time you cased it on the spine.
$32.99
This is an axle and cone set for WTP Supreme hubs. Pop this in to freshen up that bombed-out hub after too many aerial ghost rides.
$34.99
Supreme Rear Hub 14mm Female Bolts
$750.00
HED's entire line of Big Deal fat rims can be purchased as a rim-only for the custom build of your dreams! Big Deal is 445 grams and 85mm-wide of pure fat-bike joy. This one-piece, full-carbon rim will change the way you ride. Big Deal utilizes a ribbed, single-wall design to maximize stiffness and minimize rotational weight…all on a tubeless-ready platform. Compared to most aluminum fat bike wheel/tire combinations in the market today, you can expect to lose 1.5 to 2 pounds… per wheel. Note that the Big Deal is drilled symmetrically ONLY and cannot accommodate offset frames. Big Deal utilizes Inflatobam, HED's patented tubeless technology for installing big tires. The twin channel rim design provides a better pre-inflation seal by trapping each tire bead against the rim. This drastically reduces the amount of air it takes to get the beads to “bam” into place. In conjunction with the rim shape, Inflatobam utilizes Inflatobands. These effectively provide a variable rim-channel diameter. This compensates for the discrepancies in tire bead diameters by minimizing the gap between the tire and the rim channels (the main source of air leaks). Once seated, the angled bead shelf prevents the tire from collapsing back into the rim at low pressure. Our interior surfacing and tight tolerances ensure no tire burp or slip. Also note that our rim shape does not require tire levers to remove and install tires. Inner tubes may be used, too. Additional Info - Rim Type: 85mm - Rim Material: Carbon - Rim Weight: 445g - Color: Twill Weave - Rim Hole Count: 32 - Drill Pattern: Symmetrical Only - Decal Type: White - MIN/MAX TIRE SIZE: 3.8 - 5.0" - Rim ERD: 564 (includes washer)
$54.00 - $98.00
Match your Beyond Black hubs, spokes and decals (each sold separately) with skewers from Zipp. - Sold in pairs - Stainless steel: 85 grams/set - Titanium: 78 grams/set
$19.00 - $31.00
Wheel Conversion Caps for Zipp 77/177 Disc hubs. Converts your Zipp 77 or 177 hubs to nearly any frame standard.
$21.00
These die-cut borderless decals provide a distinctive look to go with the distinctive sound and aero-advantage of Zipp wheels rolling at 45km an hour. Zipp’s Matte white and Matte black decals also are still available. Each decal kit has seven decals sufficient to cover one wheel and two matching valve-hole decals. Note: Before applying the decals, make sure the rim surface is free of dirt and debris. We recommend a gentle wipe with acetone or rubbing alcohol. Peel the white backing sheet from the decal, orientate, position and gently press the decal onto the rim surface. Starting at one end, remove the surface clear cover slip and then work the decal into the dimples using a 3M squeegee.
$7.00
Package comes with two pieces of rim tape for use with the Zipp clinchers. Woven nylon material. Tape is extra thin with a thickness of 0.5 mm. Note: For Zipp 700c and 650c aluminum/carbon hybrid clichers, use the 16 mm rim tape. For Zipp 30 wheel set use 18mm but for the wider Firecrest and Firestrike carbon clinchers use the 20mm x 1/2mm rim tape.
$714.00
Optimize your Zipp wheels with CeramicSpeed Hub Bearings to benefit from reduced friction and increased performance. The result is higher speed with the same effort as well as a higher top speed. CeramicSpeed Wheel Bearings have a proven lifetime, which is 3-5 times longer than standard bearings. All components are optimized for low friction and prolonged lifetime. This wheel kit is compatible with 1st generation non-disc Zipp NSW (before mid-2018). In The Box - 4 x 61803 bearings - 1 x 61903 bearing - 1 x 61804 bearing - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet
$38.00
SRAM's Quick Releases hold your wheel tightly in place, are built for ease of use and made to last, too. You get a front and rear quick release.
$19.00
SRAM's Rise 60 conversion caps are the ticket for converting your Rise 60 wheels to a different axle type.
$34.00
Who knew we could make a thru axle disappear? The Maxle Stealth offers a light, low profile alternative to Maxle Lite. Features - 34g lighter than Maxle Lite - Easy installation with a 6mm Allen wrench
$89.99 - $149.99
The Rampage rear wheel features a sealed bearing hub, 14mm axle and a Rampage double-walled rim. - Includes Stolen PVC rim strip - Hub/Brake Compatibility: Rim Brake - Wheel Size: 20" - ISO Diameter: 406 / 20" BMX - Valve: Schrader - Tire Type: Clincher - Rear Axle: 14mm Threaded x 110mm - Driver: 1-pc chromoly RHD or LHD - Driver Bearings: 6802 (x2), Verify bearing number on side of rubber seal - Driver Pawls: 3 Pawl - Driver Spring: Wraparound (x1) - Hardware: Steel (17mm wheel nuts) - Hub Shell Bearings: 6902 (x2) Verify bearing number on side of rubber seal - Spokes: 183mm (3X) Black w/Black Brass nipples - Drilling: 36h only - Weight: 45.4 oz
$13.73
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: Joytech, Joy U, KK 10mm x 1, rear - Compatible with 10mm x 1 axle - Cone Wrench Size: 15mm - Threads: 10mm x 1 - Diameter: 17.0mm - Length: 13.8mm - 1 cone per bag COMPATIBLE HUBS: - Joytech, Joy U, KK 10mm x 1, rear - Taiwanese rear hubs with 10mm x 1 axle
$259.99
- Black Ops DW1.1 wheelsets for popular modern day BMX and wheelie bikes - Black Ops MX1100 hubs with sealed bearings and laced with DT spokes - 24mm inner rim width supports a variety of modern sizes - OLD: Front: 100mm, Rear: 110mm - Gears: Singlespeed freewheel - Type: Tube only - Size: 24-inch
$34.15
Surly Ultra New Axle Kits are for upgrading the internals of your existing Surly New hubs or replacing the internals on your Surly Ultra New hubs. -Compatible with Surly New hubs (upgrade kit) and Surly Ultra New hubs (replacement kit) - Each kit contains an axle, two 6901 cartridge bearings, two aluminum dust shields, two stainless steel cones, two stainless steel 6x1mm bolts, and two stainless steel bolt washers - Axle is quick release and bolt-on compatible; bolts included, QR is NOT included - Standard Surly New hubs come stock with 7901 bearings; this kit uses 6901 bearings which are non-angular
$30.00
Surly Thru-Axles are low-profile, bolted Thru-Axles are specifically designed for use with Surly thru-axle compatible frames. Offered in several sizes, for both front and rear wheels. 12x142 Rear Thru Axle: - Fits: Midnight Special and MDS Dropout bikes including Instigator, Legacy Karate Monkey & Legacy Krampus. 12x142/148 Rear Thru Axle: - Designed for frames with Surly Gnot Boost spacing (145mm), capable of working with 142 or 148mm rear hubs - Fits: Karate Monkey, Krampus, Troll, Ogre, ECR 12x177 Rear Thru Axle: - Fits: Wednesday 12x197 Rear Thru Axle: - Fits: Ice Cream Truck, Big Fat Dummy 12x100 Front Thru Axle: - Fits: Midnight Special 15x110 Front Thru Axle: - Fits: Karate Monkey, Krampus 15x150 Front Thru Axle: - Fits: Wednesday, Ice Cream Truck, Big Fat Dummy
$85.00
Surly's Ultra New Disc Front Hub is a gorgeous hunk of aluminum that boasts reliable sealed bearings and a 6-bolt disc attachment. The forged chromoly axle is flex-free for steering precision, long-lasting durability and simple quick-release compatibility.
$93.99
- Road racing/training rim based on the Aerohead rim with a wider footprint that allows for a more aerodynamic rim/tire combination when paired with a 23c tire - Tire profile mimics the characteristics of a tubular - Hollow core aluminum with machined sidewalls for improved braking - O/C version: Off center design allows for dramatically improved spoke tension on a dished wheel, the A23 OC allows for a more aerodynamic rim/tire combination when paired with a 23c tire - US made A23 rims now feature a tubeless ready design. Combine that with the new 21mm wide Velotape kit and you have a fool-proof Road and Cyclocross tubeless tire setup
$1,119.99 $1,399.99 20% Off
Bontrager's marquee lightweight carbon road wheel in a 51mm depth, designed for the ultimate in speed, stability, and confidence in all conditions. Be the fastest you The ultralight Aeolus RSL 51 is the perfect upgrade for a faster you. Created with Bontrager's all-new three-dimensional modeling design process, the all-new Aeolus RSL delivers a step-change in speed without sacrificing stability. It's built with the lightest RSL-level OCLV Carbon, shaped into a new 51mm rim profile for the ultimate in speed and versatility across all conditions. Tubeless Ready rims with a wider 23mm inner width are proven to roll with less drag, adding to the overall speed gains, while ultralight hubs with DT Swiss 240s internals and a Ratchet EXP 36-point freehub keep your ride smooth. All Bontrager carbon wheels are warrantied for life for the original purchaser and come with the added protection of Carbon Care. If you structurally damage your wheels while riding in the first two years of ownership, we'll replace them. It's that easy. Product details - RSL OCLV Carbon is lighter and stronger, allowing for faster, more stable rim profiles - 51mm depth rim profile born of 3D design modeling for our fastest, most stable design ever - 23mm inner width proven to roll smoother with less drag for a faster wheel and tire system - Tubeless Ready (TLR) rims compatible with both Bontrager TLR rim strips and TLR tape - 51mm depth OCLV Carbon rim (30mm outer) DT Aerolite spokes 24/24, DT ProLock nipples - Ultralight DT Swiss 240s internals with Ratchet EXP 36-point engagement 11sp freehub, 12s freehubs sold separately - Centerlock disc hubs with 12mm thru-axle front and rear, axle swap available for QR and 15mm - Includes TLR rim strip, TLR valve, and traditional rim strip
$10.99
- Skewer Trek QR-18 100mm Bolt-On Front Black - Skewer Trek QR-18 135mm Bolt-On Rear Black
$27.20
DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups. - Highly resistant adhesive tape works as a rim tape and airseal
$29.99
DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups. - Highly resistant adhesive tape works as a rim tape and airseal
$301.90
When heavy duty riding is your passion, the C 1800 is the right partner fro any mission. It is right at home at anything from jumping obstacles, cutting through mud and sprinting up steeps. Trademark DT Swiss reliability coming from precision hubs, sturdy bladed spokes and superb wheel build guarantee trouble free rides. - Spline hub with 3-pawl system - Straight-pull hub and spokes are laced 2-cross - Includes tubeless ready tape and tubeless valve
$150.90
The FR 541 may not be your first rim, but it aspires to be the last. The new rim shape improves the impact resistance, enabling you to push a little harder on the trails. It also enhances the pinch flat protection for a trusty ride on rougher tracks. Build this rim with care and it will reward you with resistance and lightness for a long-lasting bond. - Aluminum welded construction, hooked tubeless design - PHR – Pro Head Reinforcement system increases the load-bearing surface of the nipples on the rim and reduces localized stresses - Provides a 17% increase in pinch flat resistance compared to the previous FR 560 rim - Disc brake only
$127.90
The reliable rim with an ideal price-to-performance ratio! A state-of-the-art, high-quality aluminum rim, making for the perfect upgrade on any road bike. That is what the new RR 421 rim is all about. The welded rim supports wider tires and still offers a super-lightweight wheel build-up.
$127.90
This rim can take heavy loads and cope with demanding surfaces at the same time! Are you searching for a pair of rims to ride off the beaten path? If so, the RR481 may be the perfect option for you. With an inner width of 22mm and approved up to a 130kg system weight, this extremely durable rim is made for rough, off-road rides. Whether you mount them on your Cyclocross bike, your gravel racer, or for your next bike-packing trip, the RR 481 won't let you down.
$105.90
This sleeved, 25mm-wide, light, and strong rim is as versatile as AM riding itself. Derived from our extremely successful Enduro rims, which have won at the world's highest level under the world's fastest racers, the M 462 packs that world-class technology into a slightly slimmed package for All Mountain use while staying affordable thanks to the sleeved rim joint.
$16.89 - $64.99
The buyer's choice for wheel builders looking to save weight. The nipples are available with or without DT Pro Lock, a patented liquid inside the nipple thread that makes the connection between the nipple and spoke extremely durable. It pairs perfectly with any wheel, though all-brass nipples are recommended for e-bike use. - Weight: starting at 20g for 64 nipples
$465.90
Direct power transmission in every riding situation—240 with Ratchet EXP. With the latest generation of the 240 hubs, the strengths have been further enhanced. The latest Ratchet EXP freehub system increases the bearing lifetime thanks to the increased bearing distance. The new version of the end caps simplifies tool-free disassembly and makes maintenance easier. The hollow-machined ratchets transfer your energy directly into acceleration thanks to the 36 teeth.
$21.99
• 5mm skewer set (F+R hubs) • Standard 5mm Hex release • Black or Silver anodized finish • Chromoly axles
$88.79
This is one of the most versatile spokes in the DT Swiss spoke range. DT competition gets its special strength from cold forging. This makes an extremely durable spoke and thanks to the thinner middle section, it is 48 g lighter (per 64 spokes) than a spoke with a constant diameter of 1.8 mm. It is perfect for a wide range of uses, from road wheels to super light enduro MTB wheels. - Double Butted: 2.0/1.8/2.0 - One 264mm spoke = 6g - Nipples sold separately
$180.90
This welded, 30mm-wide E-MTB rim is the ideal all-rounder. When you head into the unknown, the HX 531 is the perfect choice with a 30mm internal width to support meaty tires. With an ideal position in the middle of the strength to weight to width range, it works with many tire sizes and is the ideal choice for all eMTB's meant to be ridden on proper MTB terrain.
$105.90
Sleeved 30mm Enduro rim, ready to eat rocks. Bringing wide profiles to the most demanding enduro riders, both price- and performance-wise. A sibling of our EWS-winning welded rims, the E 532 packs the materials and technology the world's fastest racers use and puts it into an affordable rim for everyday chargers.
$616.90
Snappy acceleration is what you can expect from this aluminum wheel developed to meet all cross country needs. If, to you, cross country means high-speed, after-work rides, and the occasional endurance race, then you should have a closer look at the XR 1700 SPLINE wheels. With a light and welded cross country aluminum rims, reliable 36T RATCHET SL hubs, and Swiss precision finish, all the way from the competition spokes to the signature DT Swiss wheel build quality, it's a wheelset that is up to competing, day-in, day-out, against yourself, against your buddies, or in an all-out race.
$1,193.90
Made for modern XC tracks—240 hub + 30 mm carbon rim = super-fast! Tailored to the needs of performance-oriented cross-country riders, the XRC 1501 SPLINE ONE leaves nothing to be desired. The light, 30mm-wide carbon rims offer ideal support for modern XC tires. Rolling on race-proven and super-durable 240 hubs with RATCHET EXP freehub system, every bit of your energy is transferred into forward motion via equally racy double-butted spokes and a perfect wheel build.
$229.90
The number to count on—240 with Ratchet EXP. The new 240 is developed for riders with the most extreme ambitions. The latest version of the hub is equipped with the Ratchet EXP system to maximize reliability. The increased bearing distance increases bearing lifetime, the straight spring provides more direct engagement (which reduces wear), and a smaller number of parts not only makes maintenance easier, but also reduces weight.
$229.90
The number to count on—240 with Ratchet EXP. The new 240 is developed for riders with the most extreme ambitions. The latest version of the hub is equipped with the Ratchet EXP system to maximize reliability. The increased bearing distance increases bearing lifetime, the straight spring provides more direct engagement (which reduces wear), and a smaller number of parts not only makes maintenance easier, but also reduces weight.
$54.19 - $440.95
DT Champion 2.0 spokes cover the whole spectrum from reliable road wheels to MTB gravity wheels. - Straight pull spoke blanks - Nipples sold separately
$76.90
Direct power meets simplicity—running smoothly day-in and day-out. The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.
$47.70
Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.
$52.90
When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows you to fully tighten the axle and perfectly position the lever. - Ratcheting system tightens skewers with turns rather than a cam - Lever can be rotated into an ideal position after tightening - Removable, plug-in lever design is streamlined and protects your RWS lever