Accessories

We put together this set of carefully chosen tools to do basic maintenance and cleaning as well as perform a wide variety of repairs and adjustments on just about any bicycle. A perfect way to start or add to your collection of shop-quality bicycle tools. The AK-5 includes a tough toolbox to protect your investment. Kit Includes: - AWS-1 3-Way Hex Wrench - BBB-4 Big Blue Book of Bicycle Repair - CC-4 Chain Checker - CM-5.3 Cyclone Chain Scrubber - CN-10 Professional Cable and Housing Cutter - CNW-2 Chainring Nut Wrench - CT-3.3 Chain Tool - DCW-1 Double-Ended Cone Wrench: 13/14mm - DCW-2 Double-Ended Cone Wrench: 15/16mm - DCW-3 Double-Ended Cone Wrench: 17/18mm - DH-1 Dummy Hub - DT-2 Rotor Truing Fork - FR-5.2 Cassette Lockring Tool - GSC-1 GearClean Brush - HCW-16.3 Chain Whip/Pedal Wrench - HXS-1.2 Professional L-Shaped Hex Wrench Set - MLP-1.2 Master Link Pliers - PAW-12 12" Adjustable Wrench - RR-12 Tape Measure - SD-2 #2 Phillips Screwdriver - SD-3 3mm Flat Blade Screwdriver - SW-0 Precision Spoke Wrench: .127" - SW-2 Precision Spoke Wrench: .136" - TL-1.2 Tire Lever Set - TWS-3 Torx Compatible 3-Way Wrench - VC-1 Valve Core Tool

- The HBP-1 is designed to quickly and accurately press bearings into a wide variety of cartridge bearing-type bicycle hubs. - Quick release design for fast tool installation and removal - Includes two bearing presses and precision machined aluminum pilots, bushings, and spacers - Works with more than 20 different cartridge bearing sizes and multiple axle configurations

The 2197 is an add-on accessory for the Park Tool DT-5 and DT-5.2 Disc Brake Mount Facing Set to enable easier and more efficient facing of disc brake mounts on carbon fiber frames. Features a brazed-on diamond grit surface that is over 100 times more durable and effective on carbon fiber than the cutter included with the DT-5.2. The 2197 sits between the cutter of the DT-5.2 and the brake mount, and smoothly and evenly grinds the mounting surface until it is flat and properly perpendicular to the rotor. NOTE: The 2197 is intended for facing carbon fiber only. Aluminum, steel, and titanium disc brake mounts should be faced using the #2171 facing cutter included with the DT-5.2. For carbon frames that feature aluminum inserts (with a carbon/aluminum hybrid mounting surface), use the #2197. When machining carbon fiber, regularly apply water (or a similar solution) to the cutting surface.

The BX-2.2 features updated pallet configuration and storage options to help you keep your tools secure and easily accessible. The expanded custom designed tool pallets, including dual-sided pallet wings, are all housed in a virtually indestructible composite travel case. Designed and built for the traveling mechanic who demands the best! - Custom designed tool-holding pallets with loops and pockets - Folding, dual-sided pallet wings - Front tool pallet that stores securely inside during transport - Dent-proof composite shell built around an aluminum frame - Key lock - Nominal dimensions: 19" x 14.85" x 8.5" (48.25 cm x 37.7 cm x 21.6 cm), 13.2 lbs. (6 kg)

The PRS-26 incorporates proven features from our other Team Issue stands to produce a strong, lightweight repair stand that's at home on-the-go or in the race pits. The sturdy tripod leg design folds and unfolds quickly and easily, and provides stability on any surface. The clamp is height-adjustable from 97 to 147 cm (38" to 58"), and can be positioned over one leg or between two legs to accommodate any bike. Precisely constructed from anodized 6063 T6 lightweight aluminum and durable composites, the PRS-26 is our lightest full-featured repair stand, and folds compactly for storage or transport. The PRS-26 is equipped with the time-tested 100-25D Micro-Adjust Clamp, the same design featured on our shop repair stands. The 100-25D features narrow clamping jaws to fit into tight areas or on short seat posts, and clamps nearly any tube from 23 to 76 mm (7/8" to 3"), including aero tubes and dropper posts. The cam-actuated adjustment system allows for quick entry, adjustment and exit. - Maximum weight capacity*: 36 kg (80 lbs.) - Clamp capacity: round and aero tubes from 22 to 76 mm (7/8" to 3") wide - Jaw width: 70 mm (2.75") - Height adjustable from 97 to 147 cm (38" to 58") - Base when open forms a triangle of 126 x 126 x 126 cm (49.6" x 49.6" x 49.6") - Weight: 5.7 kg (12.6 lbs.) - The PRS-26 uses the 100-25D Micro-Adjust Clamp - Replaceable jaw covers (part #1960) *NOTE: The maximum weight capacity of the PRS-26 assumes the bike's center of gravity is positioned directly below the clamp.

The perfect pair of bags for any adventure: you'll be astonished at how much gear fits in the Ortlieb Bike-Packer Plus! The classic flap closure is easy to operate and provides a maximum of stowage on top. The waterproof, three dimensional front compartment offers additional space for many of the small items you may need to access quickly while en route. The durable, high-quality Cordura fabric provides optimal protection against water, dust and abrasion. Thanks to the proven QL2.1 system with self-closing hooks, attaching the Bike-Packer Plus to your bike rack and removing it again is a matter of seconds. All of these features allow you to devote your attention to your tour and the beautiful sights to see along the way, no matter what the weather! - Pannier pair with lid closure and large packing volume - PU-laminated Cordura - QL2.1 mounting system for racks with max. 16 mm tube diameter - 20 mm hook available as separate accessory (e.g. for E-bikes) - Reduction inserts for tube diameters 8, 10 und 12 mm with anti-scratch function preventing abrasion on the rack - Hooks adjustable without requiring tools - Lower hook rail made of two-component hard-soft synthetic with anti-scratch function protecting the rack - Including integrated inner pocket and shoulder strap - Due to its symmetrical form it is possible to use only one bag on left or right side - The dust flap - with easily operable pull cord - under the lid provides protection e.g. against water, dust and snow - The edge protector prevents contact with spokes and abrasion - Simultaneous use of Ortlieb Travel-Biker possible - Highly reflective 3M Scotchlite reflector - Easy to clean inside

While "good enough" gets the job done, there is beauty in going above and beyond. The SILCA SuperPista Ultimate is the pinnacle of what a floor pump can achieve. From the highly accurate analog gauge to the magnetic HIRO dock to the lathe-turned Purpleheart wood handle, this floor pump embodies the SILCA mantra of passion, precision, performance. - Full Stainless Steel, Aluminum, Wood and Brass Construction—NO PLASTICS - SILCA Lifetime PLUS Shield Warranty—the most comprehensive warranty in all of Cycling - Ergonomic Purpleheart wood and Investment Cast Stainless Steel Handle - Full IGUS Linear Bearings for Ultimate Smoothness - Thick Full Grain Leather Piston Gasket—More Efficient and Durable than Rubber! - 1% Gauge Accuracy allows for Ultimate Ride Tuning

With specifications more akin to a suspension fork than a traditional pump, the SuperPista combines a full metal shock piston design with the classic Italian leather plunger washer and self-lubricating linear bearings to create the highest-efficiency, smoothest-running SuperPista to date. Efficient, accurate, durable are the trademarks of the SuperPista floor pump. - High-mount digital gauge accurate to 1% with backlight, adjustable pressure alarm, and adjustable pressure units (uses two CR2032 batteries) - Full-size Ash wood handle with a secure carrier strap - High-efficiency 28mm SILCA leather piston assembly - Brass air check-valve assembly - Alloy barrel with plated steel piston shaft - Long filler hose with integrated Schrader chuck - Hiro locking-lever Presta chuck with a magnetic dock - Rated to 220psi

The Burley Bee, our original bike trailer, is a long-standing family favorite for biking with children. With UV-protected windows, front and rear reflectors, and a 5-point harness system, the Bee takes both safety and comfort seriously.

ShockWiz is a suspension tuning system for air-sprung mountain bikes that combines high-tech hardware with an intuitive smartphone app. It's lightweight, durable and powered by a long-lasting coin cell battery, ShockWiz automatically records and evaluates suspension performance every time you ride. The ShockWiz app displays straightforward adjustments that unite bike, terrain and riding style. ShockWiz works for all mountain bike riders, regardless of their experience or bike's intended use. It works on hardtail and dual suspension bikes, and for all levels of skill, speed, and terrain. With ShockWiz, you know exactly how your suspension is performing – and how to make it better. Features & Benefits: - Automated tuning recommendations - Shock tuning score - a snapshot of how well your suspension is set up for you - Works on hardtail and dual suspension bikes. Works for Cross-Country, Trail, All Mountain and Downhill. - Inexpensive, replaceable CR2032 battery lasts for months - Waterproof and dustproof - IP67 rating - Two alternative hoses (included) offer a range of fitting options - Smartphone app is compatible with Apple and Android phones Essential Details: - ShockWiz is designed for all mountain bike riders, regardless of your experience or bike's intended use. - You can tune for every riding style: Efficient (pedaling), Balanced, Playful or Aggressive. - Advice for air pressure, spring rate, compression and rebound is displayed in the intuitive smartphone app. - In the box: ShockWiz hardware, two hoses, rubber mounting boot and zip ties.

Our best pair of lights. Daytime running lights for visibility, and Kindbeam that lights the way while staying out of oncoming riders' eyes. Do the (b)right thing A ready-for-anything light set that pairs Daytime Running Light visibility with the bright commuter Pro RT front light. Kindbeam keeps more light on the path ahead of you while avoiding oncoming riders' eyes, for a bright light that won't blind oncoming riders. It's equipped with a visible fuel gauge, wireless connection to tail light, and charge-back that allows you to use the light as a battery bank to charge gadgets. All buttoned up with a Flare RT for the top light package for any ride. - See and be-seen light set for everything you need to ride with lights every ride, day or night - Commuter Pro RT with Kindbeam keeps light on the ground ahead of you and out of oncoming riders' eyes - Flare RT provides ultimate visibility for any road, city, or path - Specifically designed focus, flash, and range flash patterns for daytime visibility for up to 2km - Commuter Pro modes: high 1000LM — 1.5hrs, low 500LM — 3hrs, day flash 300 LM — 12hrs - Flare RT Flash modes: 90LM — 6hrs, 45LM — 12hrs, 5LM — 15hrs, Steady modes: 25LM — 4.5hrs, 5LM — 13.5hrs - Blendr-compatible for integrated mounting on compatible Blendr stems, helmets, and helmet mounts - USB-rechargeable with included USB-C and micro USB cable

A waterproof, dry-bag-inspired / urban-inspired pannier set that overcomes limitations normally found with waterproof bags. - OCEANWEAVE 600D reclaimed fishnet polyester with waterproof polyurethane coating. - HYDRACORE liner provides an exceptional IPX5 waterproof rating. - Rixen & Kaul VARIO 2 spring-loaded hooks immediately adjust from 6mm-16mm, without any need for tools. - Rixen & Kaul lower SLIDE-LOCK and FLIP-LOCK hold panniers firmly in place. - Triple webbing tie-downs allow variable size/shape loads to be carried outside of the main cavity. Ideal for attaching U-locks. - Intuitive waterproof roll-down closure system. - Ultra-visible three-way 3M triangle logos. - Ultra-stiff Polypropylene backing plate. - Front and rear light clips. - Carry handles. - D-Rings built in to hook attachment points for additional luggage tie-down, or for attaching your own shoulder strap. - Volume 31.6L / 1928 cu/in (pair) (15.8L / 964 cu/in each bag) - Weight 1320g / 2.91 lbs (pair) - (660g / 1.46 lbs each bag) - Dimensions 39x27x15cm / 15.4-inches x10.6-inches x5.9-inches (each bag)

A waterproof, dry-bag-inspired / urban-inspired pannier set that overcomes limitations normally found with waterproof bags. - OCEANWEAVE 600D reclaimed fishnet polyester with waterproof polyurethane coating. - HYDRACORE liner provides an exceptional IPX5 waterproof rating. - Rixen & Kaul VARIO 2 spring-loaded hooks immediately adjust from 6mm-16mm, without any need for tools. - Rixen & Kaul lower SLIDE-LOCK and FLIP-LOCK hold panniers firmly in place. - Triple webbing tie-downs allow variable size/shape loads to be carried outside of the main cavity. Ideal for attaching U-locks. - Intuitive waterproof roll-down closure system. - Ultra-visible three-way 3M triangle logos. - Ultra-stiff Polypropylene backing plate. - Front and rear light clips. - Carry handles. - D-Rings built in to hook attachment points for additional luggage tie-down, or for attaching your own shoulder strap. - Volume 45.2L / 2755 cu/in (pair) (22.6L / 1378 cu/in each bag) - Weight 1530g / 3.37 lbs (pair) - (765g / 1.69 lbs each bag) - Dimensions 43x30x17.5cm / 16.9-inches x11.8-inches x6.9-inches (each bag)

Complete tool kit for installing wheels manufacturing bottom brackets. Kit includes our new bottom bracket socket tool for installing our BB cups, along with new sealed bearing drifts for the following ID bearings: - 22mm - 24mm - 29mm - 30mm Bottom bracket press pro install kit includes: - UNC 48mm 16-notch socket x 1 - 22x37 drift 1/2" x 1 - 6806 OB 1/2" x 2 - 24x37 OB 1/2" x2 - 1/2" frame drift x 1 1/2-13 x 9. 7" - threaded rod unc x 1 44-48. 5mm - double 16-notch 1/2" socket x 1 - threaded handle x 2

Dubbed 'Straggle-Check' frame bags, these bags are designed to fit both 700c and 650b Straggler and 700c Cross Check frames. Size up one size on your bag if you've got a 650b Straggler frame and voila, it fits. These are handmade by Revelate Designs in the U.S., made of Dimension Polyant VX 21 polyurethane coated fabric. It's durable, rip resistant, tightly woven and laminated to make it highly water resistant but not fully waterproof…. Revelate advises using stuff sacks inside (such as the one in which our bags are packaged) if you risk riding in extended downpours or underwater. Surly's Straggle-Check frame bags (as well as their mountain bags) are now using a ladder strap system, which allows greater flexibility in how you attach the bag to your frame. The ladder straps let you customize the fit and placement of the mounting straps so if you have some weird contraption clamped to your frame tubes like a chain keeper, cable pulley, or some trinket grandma gave you, it won't interfere with the mounting straps on the frame bag. They're also including foam bumpers for the mounting straps to minimize thread abrasion to the bag and attachment points Quality YKK brand water resistant zippers – with an improved, water resistant zipper 'garage' – control compartment access and help keep the weather out. Zippers are sewn with a stretch panel to relieve stress on the zipper as well. Stress even kills zippers. The large main compartment has a flexible divider inside, and there's a hydration port to make sure your whistle stays wet. There's also a compartment suitable for smaller items you'll access relatively often, like your map, phone, hard boiled eggs, uncontained pudding, marbles for playing marbles, your dugout, that ring you found that makes you disappear when you put it on, or whathaveyou. Frame bags such as this are light and reasonably voluminous. They are stable because they center weight low between your wheels and body, and they go places where racks and panniers are often troublesome, like singletrack. Note: due to the rough texture of the mounting straps, prolonged use may lead to scratched or worn paint. If you're worried about keeping everything looking pristine you probably ought to look for some other type of bag, or figure a way to protect the paint, such as duct tape, or tatting a top tube doily - for example.

The Pro 2200 boasts one of the category's best power-to-weight ratios. With 2200 lumens of light output, using 3 CREE LEDs- set into a NiteRider custom reflector, guarantees to set the darkest bike trail ablaze. It features an accurate eight-step fuel gauge, keeping the rider informed of battery levels at all times. These attributes make the Pro 2200 the "go to" light among the world's top athletes and enthusiasts alike. - Compact and lightweight, perfect for race inspired riders - Custom 3 cone reflector producing brilliant trail illumination - 3 – class leading CREE LEDs at 6000k - Rugged design with Dupont Fiberglass reinforced nylon housings - Handlebar mount fits up to 35mm diameter bars - Helmet mountable - Lightweight 4 cell Li-Ion battery - Easily check battery power levels with the 8 step fuel gauge - FL 1 Standard IP64, dust and water-resistant - Convenient nylon storage pouch WARRANTY The Pro 2200 Race is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Headlamp - Li-Ion Battery - Helmet Mount - Handlebar Mount – Fits up to 35mm - 36" Extension Cable - AC Adapter - Nylon Storage Pouch

"The PCS-9.3 is a basic folding bicycle workstand designed and built for the home mechanic – a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair. Features 18"" (460 mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing. The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with a locking support yoke and upgraded internals for extra dependability. The PCS-9.3 is able to hold up to 80 lbs. (36 kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes.* The PCS-9.3 quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion. The PCS-9.3 is the perfect way to upgrade your home shop. NOTE: The maximum weight capacity of the PCS-9.3 assumes the weight is centered below the clamp and between the legs.? - Fully adjustable clamp fits 7/8"" to 3"" (22 mm–76 mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts - Narrow clamping jaws (2.7""/70 mm) fit into tight areas or on short seat posts - Durable textured powder coat finish - Maximum weight capacity: 80 lbs. (36 kg) - Height adjustable from 39"" to 57"" (990 mm–1450 mm) - Base when open forms a triangle of 36"" x 36"" x 48"" (920 mm x 920 mm x 1210 mm) - Folds down to 44"" x 14.5"" (1140 mm x 370 mm) - Weight: 16 lbs. (7.2 kg) - #2848A quick-release collar with accessory pods required for use of PTH-1 Paper Towel Holder or 106 Work Tray"

Utilizing the ultimate in cycling GPS technology, the Lezyne Mega XL is a must have device for serious riders. It has a large, 2.7-inch 240x400 high-resolution screen with the option of vertical or horizontal viewing. It can simultaneously pair with Bluetooth Smart or ANT+™ enabled power meters, heart rate monitors and speed/cadence sensors, in addition to compatible electronic drivetrains. When paired with an iOS or Android handheld through the free Lezyne Ally V2 app, the device provides turn-by-turn navigation and phone notifications (incoming calls, texts and message app notifications). It has on-screen preloaded maps, provides turn-by-turn navigation, off-line navigation and can be instantly customized. Live tracking (Lezyne Track) can be activated in the app to let friends and family follow rides in real-time. Furthermore, the device is equipped with GPS/GLONASS, a barometer and an accelerometer. Combined, these greatly improve accuracy and data recording. It also has best-in-class battery runtime of up to 48 hours. All this and a whole lot more. - Navigate with Komoot to generate sport-specific, topographic routing tailor-made for your next outdoor experience - Create interactive videos of your ride with Relive - Lezyne Track offers subscription-free live tracking and telemetry - Add data fields to map and navigation screens - Super accurate, advanced data recording system combines GPS plus Glonass satellites - Simultaneous ANT+ and Bluetooth® Smart connectivity - Multiple real-time features when paired to the Lezyne Ally app - Durable, composite construction

Perfect for taking to races and rides, the Portable Workbench is a bench that folds for easy transport and storage. It features a large work surface with specially sized slots, holes, and recesses and for holding tools, shop towels, lubes, beverages, etc. The folding steel legs provide a solid base for a toolbox and supplies, too.

The 16-piece set from the screwdriving tool specialist Wera solves the most important screwdriving problems associated with bicycles—reliable control of applied torque to protect sensitive components—with a click-torque wrench in the unmistakable Wera design. It features a very robust design with high accuracy, along with easy setting and saving of the default values. The audible and tactile snapping on reaching the scale values facilitates the safe setting of the desired torque values, while the robust release mechanism guarantees a clearly audible and tactile trigger signal when the set torque is reached - 16-piece wrench set for bicycle applications with torque control including Wera Clique-Torque wrench A 5 (2.5-25 Nm) - Sockets and bit sockets for the most popular screw profiles on road bikes, mountain bikes, and e-bikes - Easy setting and saving of the desired torque value with an audible and tactile click when the scale value is reached (click 1) - Safely quantified force: when the set value is reached, the torque wrench triggers audibly and noticeably (click 2) - Precise to +/- 4%

Made of durable polyester fabric and long known as an ideal pannier for extended tours in any kind of weather, the spacious Bike Packer Classic is now available with the QL2.1 rack mounting system. The advantage of this faithful companion at your rear wheel: greater transport comfort, stability and safety. - Panniers (pair) with classic lid closure for large packing volume - Sides of PS 490 nylon material, front and back of PD 620 - QL2.1 mounting system for racks with max. 16 mm tube diameter - 20 mm hook available as separate accessory (e.g. for E-bikes) - Reduction inserts for tube diameters 8, 10 und 12 mm with anti-scratch function preventing abrasion on the rack - Hooks adjustable without requiring tools - Lower hook rail made of two-component hard-soft synthetic with anti-scratch function protecting the rack - Including integrated inner pocket and shoulder strap - Due to its symmetrical form it is possible to use only one bag on left or right side - The dust flap - with easily operable pull cord - under the lid provides protection e.g. against water, dust and snow - The edge protector prevents contact with spokes and abrasion - Simultaneous use of Ortlieb Travel-Biker possible - Highly reflective 3M Scotchlite reflector - Easy to clean inside

Park Tool's Event Stand Add On Kit extends the length of the ES-1 Event Stand (sold separately) by eight feet. It includes one height-adjustable tripod upright, two 47” (119cm) support tubes, and one connector sleeve.

Park Tool's 692 Left-Hand Bottom Bracket Tap is a 1.370" x 24 TPI replacement tap for the BTS-1 Bottom Bracket Tap Set. This tap is used on the drive side (right side) of the bike. This side of the bottom bracket uses a counter-clockwise or left-hand thread. Note: It is very important to have sharp and accurate cutting tools for effective tapping and thread-chasing. Using an excessively worn or damaged tap can cause permanent damage to the frame and/or bottom bracket.

Park Tool's Crown Race Cutter Adaptor is used in conjunction with the CRC-1 Crown Race Cutting Tool (sold separately) to machine 39.8mm crown race seats (1.5” standard) on tapered forks with 1-1/8” steerer tubes. It includes a precision-machined adaptor body and a 39.8mm high-speed steel crown race cutter. The CRC-15 will work on forks with a maximum 1.5-inch taper of 4.25 inches.

Tough, light, and loaded with features, that's Park's Team Issue Repair Stand. The 3-point leg system and adjustable height (up to 60 inches) creates a stable, ergonomic repair station for easy, efficient wrenching. And, Park's Professional Micro Adjust Clamp quickly clamps nearly any frame tube from 7/8 to 3 inches in diameter, including aero tubes. And the clamping force is fully adjustable for safety. Plus, the clamp has soft, durable rubber jaws that are narrow to fit on even short seatposts and tight areas on a bike. And, the clamp rotates 360 degrees for easy access to any part of the bike. Also, if you're in a hurry, there's a seat cradle for simply hanging your bike too. This great stand folds fast and small for easy transport and storage.

Park Tool offers premium-quality reamers for nearly any bicycle standard. The reamers below are designed to quickly, accurately, and precisely ream headtubes when used with Park's Head Tube Reamer (HTR), ensuring a perfect headset fit and prfoessional-quality bicycle build. Choose the correct reamer for your application using the following information: - 751.2: This reamer is sized to 30.1mm. This allows a 0.1mm interference fit when pressing the 30.2mm headset of the “Euro” one-inch standard. - 754.2: This reamer is sized to 33.9mm. The allows a 0.1mm interference fit when pressing the 34.0mm headset of the 1-1/8" standard. - 788: This reamer is sized to 43.95mm. It reams head tubes to accept “internal” headset cups with 44.05 - 44.10mm O.D. (1-1/8 ZS standard). It is used with Park Tool's 690-XL Facing Cutter and 750 Centering Cone. - 738: This reamer is sized to 52.1mm. It is used to ream head tubes using the 1-1/2" integrated headset standard. It is used with Park Tool's 690-XL Facing Cutter and 750.2 Centering Cone Adapter. - 789: This reamer is sized to 55.95mm. It is used to ream head tubes to accept “internal” headset cups with 56.00–56.10mm O.D. (1-1/2 ZS standard). It is used with Park Tool's 690-XXL Facing Cutter and #750 Centering Cone Adaptor. - 799: This reamer is sized to 47mm. It is used for cutting the lower head tube on frames using an IS47 bearing for a 1-1/4" integrated headset. It cuts a 45-degree bearing set shoulder.

- The perfect trailer for taking your favorite pet along for the ride - Steel folding frame with 16-inch quick release wheels - 600D polyester canopy with vented window - PVC slip-proof reinforcement on foot rest - Attaches to rear axle via trailer hitch mount (Not pictured) - Included dog leash keeps pets safe and in the trailer - 66lb weight limit

Rear mounted child bike seat providing comfort and style for everyday rides. - Soft and shock-absorbing foam seat that lets your child travel in comfort - Adjustable footrests and footstraps ensure a perfect fit as your child grows - Available in frame, rack, and front versions - The seat can be mounted and dismounted from the bike in seconds with the universal quick-release bracket, making it easy to switch between different bikes - Smooth, comfortable ride for your child due to the DualBeam suspension system that absorbs road shock - Built-in reflector and safety light attachment point for increased visibility - Childproof safety buckle secures your child quickly and easily - Adjustable padded 5-point safety harness for a safe, custom fit and maximum child comfort - Water-repellent materials make the seat easy to clean and to keep dry - High quality metal lock that secures the child bike seat to your bike included

Discover new routes, and ride with confidence using the Edge Explore 2 GPS cycling computer This navigator features a bright 3” touchscreen display, and it’s simple to set up and ready to ride straight out of the box - Ride like a local during your next on- or off-road adventure - High-contrast maps provide bike-specific, turn-by-turn navigation — and highlight popular roads and trails along with high-traffic areas - When connected to your compatible eBike, receive navigation guidance and alerts based on your bike’s battery status, assist level and range - Plus, safety features such as incident detection and Assistance let you ride with greater peace of mind (Requires setup and your smartphone to be in an area with network coverage) - Computer Type: Wireless - GPS: Yes - Connectivity: ANT+, BT, Wi-Fi - Customizable Screen: Yes - Battery Type: Lithium Ion - Touchscreen: Yes - External Sensor Compatibility: Speed/Cadence/HR/Power

A Bike Roller Bag That You Can Count On For Easy Packing And Full, Padded Coverage Take the stress out of traveling with your bike. The Dakine Bike Roller Bag is tricked-out to make packing easy and to keep your bike safe during transit. It delivers 360° coverage for mountain, road, downhill, and fat bikes. First, the anchoring system and bag frame structure are interconnected to maintain structural integrity and bike safety. Second, bike-specific pads and EVA padding protect critical areas including discs, drivetrain, and dropouts. The kit includes wheel and fork bags as well as a roll-up tool bag to keep essential assembly tools and small parts organized. Third, bomber wheels and multiple grab handles make for smooth transitions, and the bag's collapsible design lets you roll it up for compact storage. - Fits one downhill, trail, fat, 29'er, or road bike - Smooth-rolling, replaceable urethane wheels - 360° Padded bike protection with five internal padded sleeves - Rolls up for compact storage (55"x 14.5 x 18) (140cm x 37 x 46) - Five upper grab handles - Lockable YKK #10 main zipper - Removable Tool Roll for tools and pedals - 600D Recycled Polyester - Dimensions: 55 x 13 x 34" [ 140 x 33 x 86cm ] - Weight: 17.75lbs [ 8kg ]